Hunan HengAn Weiye Metal Products Co., Ltd.- steel pipe manufacturer

Casing Pipe

Products characters

Plastic caps plugged at the two sides of pipe ends

Should be avoided by the steel strapping and transport damage· Bundled signs should be uniform and consistent

The same bundle(batch) of steel pipe should be came from the same furnace.

The steel pipe has the same furnace number, the same steel grade, the same specifications.

Product Details

Introduction

A casing pipe is a hollow steel tube that is typically rammed into place through the earth by using a hydraulic or pneumatic jack. After being driven, the displaced soil is removed and the product pipe, or carrier pipe, is inserted inside the steel tube.

Available Sizes

Category:ERW, HFW or SMLS

Standards:API 5CT PSL1/PSL2 J55,K55,N80-1,N80-Q,API 5CT PSL1/PSL2 L80-1, L80-9Cr,L80-13Cr,C90, C95, P110, Q125

Steel Grade:H40, J55, K55, N80

Connections

API 5CT is applicable to following connections which complied with API SPEC 5B:

• SC:Short round thread casing

• LC:Long ound thread casing

• BC:Buttress thread casing

• NU: Non-upset tubing

• EU:External upset tubing

Specification

DN	O. D.		Weight		W. T.		End Machining Form
	O. D.		Weight		W. T.		Steel Grade
	in	mm	lb/ft	kg/m	in	mm	H40	J55	L80	N80	C90	P110
	in	mm	lb/ft	kg/m	in	mm	H40	K55	L80	N80	T95	P110
4-1/2	4.500	114.3	9.50	14.14	0.205	5.21	PS	PS	–	–	–	–
			10.50	15.63	0.224	5.69	–	PSB	–	–	–	–
			11.60	17.26	0.250	6.35	–	PSLB	PLB	PLB	PLB	PLB
			13.50	20.09	0.290	7.37	–	–	PLB	PLB	PLB	PLB
			15.10	22.47	0.337	9.56	–	–	–	–	–	PLB
5	5.000	127	11.50	17.11	0.220	5.59	–	PS	–	–	–	–
			13.00	19.35	0.253	6.43	–	PSLB	–	–	–	–
			15.00	22.32	0.296	7.52	–	PSLB	PLB	PLB	PLBE	PLB
			18.00	26.79	0.362	9.19	–	–	PLB	PLB	PLBE	PLB
			21.40	31.85	0.437	11.10	–	–	PLB	PLB	PLB	PLB
			23.20	34.53	0.478	12.14	–	–	–	–	PLB	–
			24.10	35.86	0.500	12.70	–	–	–	–	PLB	–
5-1/2	5.500	139.7	14.00	20.83	0.244	6.20	PS	PS	–	–	–	–
			15.50	23.07	0.275	6.98	–	PSLB	–	–	–	–
			17.00	25.30	0.304	7.72	–	PSLB	PLB	PLB	PLBE	PLB
			20.00	29.76	0.361	9.17	–	–	PLB	PLB	PLBE	PLB
			23.00	34.23	0.415	10.54	–	–	PLB	PLB	PLBE	PLB
			26.80	39.88	0.500	12.70	–	–	–	–	–	–
			29.70	44.20	0.562	14.27	–	–	–	–	–	–
			32.60	48.51	0.625	15.88	–	–	–	–	–	–
			35.30	52.53	0.687	17.45	–	–	–	–	–	–
			38.00	56.55	0.750	19.05	–	–	–	–	–	–
			40.50	60.27	0.812	20.62	–	–	–	–	–	–
			43.10	64.14	0.875	22.22	–	–	–	–	–	–
6-5/8	6.625	168.28	20.00	29.76	0.288	7.32	PS	PSLB	–	–	–	–
			24.00	35.72	0.352	8.94	–	PSLB	PLB	PLB	PLBE	PLB
			28.00	41.67	0.417	10.59	–	–	PLB	PLB	PLBE	PLB
			32.00	47.62	0.475	12.06	–	–	PLB	PLB	PLBE	PLB
7	7.000	177.8	17.00	25.30	0.231	5.87	PS	–	–	–	–	–
			20.00	29.76	0.272	6.91	PS	PS	–	–	–	–
			23.00	34.23	0.317	8.05	–	PSLB	PLB	PLB	PLBE	–
			26.00	38.69	0.362	9.19	–	PSLB	PLB	PLB	PLBE	PLB
			29.00	43.16	0.408	10.36	–	–	PLB	PLB	PLBE	PLB
			32.00	47.62	0.453	11.51	–	–	PLB	PLB	PLBE	PLB
			35.00	52.09	0.498	12.65	–	–	PLB	PLB	PLBE	PLB
			38.00	56.55	0.540	13.72	–	–	PLB	PLB	PLBE	PLB
			42.70	63.54	0.625	15.88	–	–	–	–	–	–
			46.40	69.05	0.687	17.45	–	–	–	–	–	–
			50.10	74.56	0.750	19.05	–	–	–	–	–	–
			53.60	79.77	0.812	20.62	–	–	–	–	–	–
			57.10	84.97	0.875	22.22	–	–	–	–	–	–
7-5/8	7.625	193.68	24.00	35.72	0.300	7.62	PS	–	–	–	–	–
			26.40	39.29	0.328	8.33	–	PSLB	PLB	PLB	PLBE	PLB
			29.70	44.20	0.375	9.52	–	–	PLB	PLB	PLBE	PLB
			33.70	50.15	0.430	10.92	–	–	PLB	PLB	PLBE	PLB
			39.00	58.05	0.500	12.70	–	–	PLB	PLB	PLBE	PLB
			42.80	63.69	0.562	14.27	–	–	PLB	PLB	PLB	PLB
			45.30	67.41	0.595	15.11	–	–	PLB	PLB	PLB	PLB
			47.10	70.09	0.625	15.88	–	–	PLB	PLB	PLB	PLB
			51.20	76.19	0.687	17.45	–	–	–	–	–	–
			55.30	80.30	0.750	19.05	–	–	–	–	–	–
8-5/8	8.625	219.08	24.00	35.72	0.264	6.71	–	PS	–	–	–	–
			28.00	41.62	0.304	7.72	PS	–	–	–	–	–
			32.00	47.62	0.352	8.94	PS	PSLB	–	–	–	–
			36.00	53.57	0.400	10.16	–	PSLB	PLB	PLB	PLBE	PLB
			40.00	59.53	0.450	11.43	–	–	PLB	PLB	PLBE	PLB
			44.00	65.48	0.500	12.70	–	–	PLB	PLB	PLBE	PLB
			49.00	72.92	0.557	14.15	–	–	PLB	PLB	PLBE	PLB
9-5/8	9.625	244.48	32.30	48.07	0.312	7.92	PS	–	–	–	–	–
			36.00	53.57	0.352	8.94	PS	PSLB	–	–	–	–
			40.00	59.53	0.395	10.03	–	PSLB	PLB	PLB	PLBE	–
			43.50	64.73	0.435	11.05	–	–	PLB	PLB	PLBE	PLB
			47.00	69.94	0.472	11.99	–	–	PLB	PLB	PLBE	PLB
			53.50	79.62	0.545	13.84	–	–	PLB	PLB	PLBE	PLB
			58.40	86.91	0.595	15.11	–	–	PLB	PLB	PLB	PLB
			59.40	88.40	0.609	15.47	–	–	–	–	–	–
			64.90	96.58	0.672	17.07	–	–	–	–	–	–
			70.30	104.62	0.734	18.64	–	–	–	–	–	–
			75.60	112.50	0.797	20.24	–	–	–	–	–	–
10-3/4	10.750	273.05	32.75	48.74	0.279	7.09	PS	–	–	–	–	–
			40.50	60.27	0.350	8.89	PS	PSB	–	–	–	–
			15.50	67.71	0.400	10.16	–	PSB	–	–	–	–
			51.00	75.90	0.450	11.43	–	PSB	PSB	PSB	PSBE	PSB
			55.50	82.59	0.495	12.57	–	–	PSB	PSB	PSBE	PSB
			60.70	90.33	0.545	13.84	–	–	–	–	PSBE	PSB
			65.70	97.77	0.595	15.11	–	–	–	–	PSB	PSB
			73.20	108.93	0.672	17.07	–	–	–	–	–	–
			79.20	117.86	0.734	18.64	–	–	–	–	–	–
			85.30	126.94	0.797	20.24	–	–	–	–	–	–
11-3/4	11.750		42.00	62.50	0.333	8.46	PS	–	–	–	–	–
			47.00	69.94	0.375	20.24	–	–	–	–	–	–
			54.00	80.36	0.435	8.46	–	–	–	–	–	–
			60.00	89.29	0.489	9.53	–	–	–	–	–	–
			65.00	96.73	0.534	11.05	–	–	–	–	–	–
			71.00	105.66	0.582	14.42	–	–	–	–	–	–
13-3/8	13.375	339.73	48.00	71.43	0.330	8.38	PS	–	–	–	–	–
			54.50	81.10	0.380	9.65	–	PSB	–	–	–	–
			61.00	90.78	0.430	10.92	–	PSB	–	–	–	–
			68.00	101.19	0.480	12.19	–	PSB	PSB	PSB	PSB	PSB
			72.00	107.15	0.514	13.06	–	–	PSB	PSB	PSB	PSB
16	16.000	406.4	65.00	96.73	0.375	9.53	PS	–	–	–	–	–
			75.00	111.61	0.438	11.13	–	PSB	–	–	–	–
			84.00	125.01	0.495	12.57	–	PSB	–	–	–	–
			109.00	162.21	0.656	16.66	–	P	P	P	–	P
18-5/8	18.625	473.08	87.50	130.21	0.435	11.05	PS	PSB	–	–	–	–
20	20.000	508	94.00	139.89	0.438	11.13	PSL	PSLB	–	–	–	–
			106.50	158.49	0.500	12.70	–	PSLB	–	–	–	–
			133.00	197.93	0.635	16.13	–	PSLB	–	–	–	–
P——Plain；S——Short-thread；L——Long-thread；B——Buttress thread；E——Extreme thread

Chemical compositions of casing pipe

Standard	Grade	Chemical compositions（％）
API SPEC 5CT	J55	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	V
	K55	0.34～0.39	0.20～0.35	1.25～1.50	≤0.020	≤0.015	≤0.15	≤0.20	≤0.20	/	/
	N80	0.34～0.38	0.20～0.35	1.45～1.70	≤0.020	≤0.015	≤0.15	/	/	/	0.11～0.16
	L80	0.15～0.22	≤1.00	0.25～1.00	≤0.020	≤0.010	12.0～14.0	≤0.20	≤0.20	/	/
	P110	0.26～0.395	0.17～0.37	0.40～0.70	≤0.020	≤0.010	0.80～1.10	≤0.20	≤0.20	0.15～0.25	≤0.08

Mechanical properties of casing pipe

Grade	Type	Total elongation under load (%)	Yield strength (min)	Yield strength (max)	Tensile strength min Mpa	Hardness Max (HRC)	Hardness Max(HBW)
J55	-	0.5	379	552	517	-	-
K55	-	0.5	379	552	655	-	-
N80	1	0.5	552	758	689	-	-
N80	Q	0.5	552	758	689	-	-
L80	1	0.5	552	655	655	23	241
L80	9Cr	0.5	552	655	655	23	241
L80	13Cr	0.5	552	655	655	23	241
C90	-	0.5	621	724	689	25.4	255
C95	-	0.5	655	758	724	-	-
T95	-	0.5	655	758	724	25.4	255
P110	-	0.6	758	965	862	-	-
Q125	All	0.65	862	1034	931	-	-

Our factory

Packing

There are probably hundreds of different methods for packing a pipe, and most of them have merit, but there are two principles that are vital for any method to work prevent rusting and Sea transportation security.Our packing can meet any needs of the customers.

· Plastic caps plugged at the two sides of pipe ends

· Should be avoided by the steel strapping and transport damage

· Bundled signs should be uniform and consistent

· The same bundle(batch) of steel pipe should be came from the same furnace.

· The steel pipe has the same furnace number, the same steel grade, the same specifications.

Message

Prev： Drill Pipe
Next： API SPEC 5CT、J55

Return